Series X55X Universal Zero-Insertion-Force DIP Test Socket
FEATURES * Aries Universal Test Socket accepts devices on 0.300 to 0.600 [7.62 to 15.24] centers. * All pin count sockets go into PCB with either 0.300 or 0.600 [7.62 to 15.24] centers. * Contacts are normally closed to eliminate dependence on plastic to sustain contact. * Socket handle can be configured with closed contacts (on) when in the UP or DOWN position, and can be mounted on either the right or left side. * Sockets can be soldered into PCBs or plugged into any socket. Socket fits into Aries' or any competitive test socket receptacle. GENERAL SPECIFICATIONS * SOCKET BODY: black UL 94V-0 glass-filled Polyphenylene Sulfide (PPS) CUSTOMIZATION: In addition to the standard products shown * HANDLE: Stainless Steel on this page, Aries specializes in custom design and production. * HANDLE KNOB: Brass 360, 1/2-hard Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the * CONTACTS: BeCu 172 per QQ-C-533 or NiB (Spinodal) * CONTACT PLATING: 50 [1.27] min. Ni under-plate per QQ-N-290, over-plated right to change product general specifications without notice. with either 200 [5.08] min. matte Sn per ASTM ORDERING INFORMATION B545-97 or 200 [5.08] 90/10 Sn/Pb per MILXX-X55X-1 X T-10727 or 10 [0.254] min. Au per MIL-G-45204 * SPINODAL CONTACT PLATING: 50 [1.27] min. Pins Plating NiB 24, 28, 32, 36, 0 = Sn over Ni * CONTACT CURRENT RATING: 1 amp 40, 42, 44, 48 0TL = Sn/Pb over Ni * INSULATION RESISTANCE: 1000 m min. Row-to-Row Spacing (btm) 1 = Au over Ni * DIELECTRIC WITHSTANDING VOLTAGE: 1000 VAC 3 = 0.300 [7.62] 6 = NiB (Spinodal) * LIFE CYCLE: 25,000 to 50,000 cycles 6 = 0.600 [15.24] Solder Pin Tail * OPERATING TEMPERATURE: -67F [-55C] min.; Handle Options 221F [105C] max. for Sn plating; 302F [150C] 1 = Left, up is on for Au plating; 392F [200C] for NiB plating 2 = Right, up is on * RETENTION FORCE (closed): 55g/pin based on a 3 = Left, down is on 0.020 [0.51] dia. test lead 4 = Right, down is on (std) * ACCEPTS LEADS: 0.015-0.045 [0.38-1.14] wide, NOTE: "on" = closed contacts 0.110-0.280 [2.79-7.11] long MOUNTING CONSIDERATIONS * See Socket Footprint below
ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: 0.005 [0.13] UNLESS OTHERWISE SPECIFIED "A" = (NO. OF PINS PER ROW x 0.100 [2.54]) + 0.590 [14.99] "B" = (NO. OF PINS PER ROW -1) x 0.100 [2.54] "C" = (NO. OF PINS PER ROW x 0.100 [2.54] + 0.415 [10.54] CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
Bristol, PA 19007-6810 USA TEL (215) 781-9956 * FAX (215) 781-9845 WWW.ARIESELEC.COM * INFO@ARIESELEC.COM
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
10001 Rev. AA
|
